Welcome to Perfect Timing Bar and Grill

Located in Owens Cross Roads, AL 

About Us

Indulge in a culinary adventure at Perfect Timing Bar and Grill the ultimate destination for American food enthusiasts in Owens Cross Roads, AL. As a premier bar and grill and family restaurant, we pride ourselves on serving up mouthwatering dishes that tantalize the taste buds and create unforgettable dining experiences for our guests.

Step into our welcoming establishment and immerse yourself in the lively ambiance of our sports bar, where the game is always on and the drinks are flowing. Quench your thirst with our extensive selection of draft beer, carefully curated to satisfy every palate, or challenge your friends to a round of beer pong while you soak in the vibrant atmosphere.

We’re more than just a restaurant. We’re a hub of excitement and entertainment. Whether you’re looking to catch up with friends over a delicious meal, unwind after a long day at work, or celebrate a special occasion with loved ones, our non-smoking bar and cozy patio dining area provide the perfect setting for any occasion.

American Food

Experience the true flavors of American food at Perfect Timing Bar and Grill in Owens Cross Roads, AL, your go-to destination for classic and contemporary cuisine. As a premier burger restaurant, we take pride in our diverse menu that showcases the best of American culinary traditions.

Patio Dining

Enjoy the serene ambiance of patio dining at Perfect Timing Bar and Grill. Our restaurant invites you to indulge in an unparalleled outdoor dining experience where the beauty of nature meets the culinary excellence of American food. With a spacious and elegantly designed patio, we provide the perfect setting for casual lunches, romantic dinners, or gatherings with friends and family.

Draft Beer

Discover the ultimate draft beer selection at Perfect Timing Bar and Grill in Owens Cross Roads, AL, where we redefine the bar and grill experience. Our venue combines the excitement of a sports bar with the casual vibe of your favorite local spot, making it the perfect place for beer enthusiasts and sports fans alike. With an extensive range of draft beers, from classic lagers to craft ales, we cater to every taste.

Enjoy American food, patio dining, and draft beer at Perfect Timing Bar and Grill in Owens Cross Roads, AL. Call (256) 725-2277 now for happy hour details! Your ultimate bar and grill experience awaits.



REVIEWS

February 2, 2025

Let’s make tonight unforgettable… your place or mine? – https://rb.gy/es66fc?lami

AmandaIntoda2
February 1, 2025

Hola, volia saber el seu preu.

IslaDon
January 31, 2025

Ola, quería saber o seu prezo.

RobertDon
January 30, 2025

Using the Balanset-1A Instrument

Equipment Preparation

vibration sensors, optical speed sensor, magnetic base, software package, and included accessories.

Connect the device to your PC using the USB interface and confirm the software installation.

Mounting the Sensors

Mount the vibration transducers securely on the machine’s housing where vibrations are most pronounced, typically near the bearings.

Aim the optical rpm sensor at the rotating shaft and apply a reflective strip to the shaft for phase angle data acquisition.

Software Startup

Initiate the Balanset program on your computer.

Configure the software for either single-plane or two-plane balancing, based on the rotor’s characteristics and the desired outcome.

Measuring Initial Vibration

Run the rotor up to its operating speed.

The application will acquire data on vibration magnitude, rotational velocity, and phase angle to determine the initial imbalance state.

Mounting the Test Weight

Bring the rotor to a standstill and affix a trial weight at a predetermined point on the rotor, specifying its mass in the software (typically in grams).

Restart the rotor, and the software will record the changes in vibration level and phase angle.

Determining the Corrective Mass

Using the acquired measurements, the program automatically determines the required corrective weight’s mass and angular position.

These parameters are displayed on the screen as numerical data and graphs.

Installing the Correction Weight

Mount the calculated corrective weight onto the rotor at the specified location and angle.

If necessary, perform intermediate checks to verify that the imbalance is being reduced.

Verification and Balancing Completion

With the compensating weight attached, operate the rotor and assess the level of any residual vibration.

If the measured vibration falls within the tolerance defined by ISO 1940, the balancing process is considered successful.

If the vibration is still outside acceptable limits, reiterate the process and fine-tune the compensating weight.

Report Generation

The program stores the balancing data, allowing you to generate and print a comprehensive report including vibration measurements, corrective weight details, and its angular placement.

Final Recommendations

Verify the secure attachment of all balancing weights and measurement sensors.

Check that the rotor’s rotation is smooth and free from undue noise or vibration.

If the rotor operates within a larger assembly, check the functionality and interplay of all interconnected parts.

Instagram: https://www.instagram.com/vibromera_ou/

Youtube : https://youtu.be/guA6XJ-ArZM?si=vmkuX7RILzKBl0zL

Our website about Balancing of rolling mill rolls in steel plants

Machinio: https://www.machinio.com/listings/98380186-portable-balancer-vibration-analyzer-balanset-1a-full-kit-in-portugal

Facebook: https://www.facebook.com/marketplace/item/350151228150722

https://zaneyncp92581.wikiinside.com/626169/vibromera_leading_in_balancing_and_vibration_analysis

EQiblychele
January 27, 2025

москитные сетки на окна купить

http://google.com.et/url?q=https://moskitka-proizvodstvo.ru

Jemoskitka-proizvodstvoitarl

Opening Hours 

 Wed – Sat: 11:00am – 11:00pm

  Sunday: 11:00am – 9:00pm

Address       

 9481 Highway 431 S, Owens Cross Roads, AL 35763

 Email:             waldropwayne@gmail.com  

Phone no:      (256) 725-2277